• Non-detectable levels of chemical residue reduces allergic skin reactions like Contact Dermatitis – Type IV Allergy.
• Lightly powdered with Modified Bio-Absorbable Corn starch USP Grade (No talc), to prevent wound infections and granulomas.
• Manufactured in clean environment to comply with EN 556 and ISO 13485 re-quirements.
• Sterilized in a validated process cycle to achieve sterility assurance level of 106, and air wash cycles to reduce sterilant residue to less than 5 ppm.
• Latex Film structure passes Viral Penetration Test (ASTM F1671.976).
• AQL 1.5 for pin holes.

Enquiry

• PRODUCT CHARACTERISTICS
  • Latex protein no more than 50µg of protein per dm2, eliminates risk of Latex Al-lergy – Type 1.
  • Chemical residue almost nil, eliminates risk of Contact Dermatitis – Type IV Al-lergy.
  • Absence of powder eliminates dangers associated with powder, preventing granulomas, adhesions, fibrosis and occupational ast.
  • Latex film structure passes Viral penetration Test (ASTM F1671:2007).
  • Manufactured in clean environment to achieve bio burden level of less than 20 cfu prior sterilization. This achieves low Pyrogen leve.
• STANDARDS
  • ASTM : D-3577-2009 & EN 455-1:2000, EN 455-2:2011 and EN 455-3:2006.
  • Registered with US FDA (510K).
  • CE Certified.
• QUALITY CONTROL
  • 100% Inspected.
  • Passes Viral Penetration Test – ASTM F 1671:2007.
  • Factory Standard of AQL 0.65.
• PRODUCT INFORMATION
  • TYPE: Powder Free Chlorinated Latex Surgical Gloves. Sterilized by ETO.
  • PRIMARY MATERIAL: Natural Rubber Latex.
  • DESIGN: Hand Specific, Curved finger, Beaded cuff, Micro rough textured.
  • POWDER FREE RESIDUE: 2 mg/glove.
  • STERILIZATION: Ethylene Oxide / Gamma as per Customer requirement.
  • Container Quantities : 160,000 Pairs ( 400 Shipper Cartons) in 1 x 20 FCL.
  • 336,000 Pairs ( 840 Shipper Cartons) in 1 x 40 FCL.

Enquiry

• PRODUCT CHARACTERISTICS
  • Pre Powdered with USP bio-absorbable cornstarch. (FDA approved).
  • Made from Natural Rubber Latex.
  • Moisture content less than 0.75%.
  • Meets International Standards ASTM D 3578, EN 455 Part I & II.
  • Beaded Cuff.
  • AQL 1.5.
  • Ambidextrous.
• STANDARDS
  • Conforms to Standards ASTM D 3578, EN 455 Part I &II.
  • Manufactured in ISO 9001:2000 Certified Facility.
• QUALITY CONTROL
  • Factory Standard of AQL 1.5 (ASTM Standard AQL 4.0).
  • Uncompromised inspection of every glove.
• PRODUCT INFORMATION
  

  Characteristics	Before Ageing	After Ageing (100 ± 2° C for 22 ± 0.3 h)
  Tensile Strength (Mpa) min.	18	14
  Elongation at Break (%)	650	500
  Stress at 500 % Elongation (Mpa)	5.5	NA
  Force at Break (N)	12	6

  • Container Quantities : 200,000 Pairs ( 500 Shipper Cartons) in 1 x 20 FCL.
  • 420,000 Pairs ( 1050 Shipper Cartons) in 1 x 40 FCL.

Enquiry

• Application: Can effectively prevent airborne infection and filter small dust panicles. Suitable for patient care areas, oral, dental procedures, clinics, isolation, IC practices, pharmacy, patient and other applications. Face mask Available in: -Woven,Non Woven, Filter ,16-28 GSM.
  1.  Face mask with ear loops:(1ply/2ply/3ply/4ply).
  2. Face mask with ties:(1ply/2ply/3ply/4ply).
  3. Active carbon face mask:(3ply/4ply).
  4. Face mask with eye shield:(3ply/4ply).
  5. Dust mask:(120g/140g/160g/180g).
  6. Paper mask:(1ply/2ply).

  Packaging :

  • 50 Pcs Per Box and 40 Box per Cartoon

  Container Quantities :

  • 9,00,000 Pieces ( 450 Shipper Cartons) in 1 x 20 FCL

Enquiry